This group of electrodes is designed for general fabricational welding of wrought sections of C-Mn steel up to 15 mm in thickness. The wrought steels may be in the form of sheet, plate, pipe, rolled, drawn or extruded products.
Applications include: plate for ship hull construction, site and workshop welding of pipes and pipeline, construction of pedestrian walkways and bridges, vehicle and boiler construction as well as a great variety of general construction and workshop applications.
The mechanical properties given in the individual data sheets are representative of all weld metal deposits welded in the flat position to the appropriate national standard.
However, it should be noted that mechanical properties of the weld metal can vary with heat input and post-weld cooling rates and can thus be affected by welding procedure, welding position and material thickness.
|C-10||A5.1 E6010||Root run pipeline welding on DC+ only||Download|
|C-11||A5.1 E6011||Root run pipeline welding AC or DC+||Download|
|C-10Mo||A5.5 E7010-A1||Capping pass pipeline welding DC+||Download|
|C-10P1||A5.5 E7010-P1||Root pass, hot pass, filler and capping pass pipeline welding DC+||Download|
|GA-120||A5.1 E7014||All positional 120% metal recovery||Download|
|GA-24||A5.1 E7024||Downhand and horizontal fillet with 180% metal recovery||Download|
|DM-727||A5.1 E7027||Downhand and horizontal fillet with 180% metal recovery||Download|
|RD-260||A5.1 E6013||Versatile general purpose electrode||Download|
|RD-460||A5.1 E6013||Used to maximum advantage for vertical down welding||Download|
|RC 8||A5.1 E6013||General purpose and vertical down root runs||Download|
|D-60||A5.1 E6012||For all positional welding including vertical down||Download|
|I-10||A5.1 E6019||Used to best advantage for V.U. and O.H. on thicker sections||Download|
|GA-27||A5.1 E6027||Downhand and horizontal fillet with 180% metal recovery||Download|
|ERP||A5.1 E6013||Particularly suited for sheet metal and thinner plates||Download|